**Proficiency with MCT building is highly preferred and will take precedence over other candidates.

Marine Electrician – II

Position Summary:
The Marine Electrician II is responsible for supporting the installation and repair of shipboard electrical systems under the guidance of senior electricians. This role requires a good working knowledge of standard practices and tools.

Key Responsibilities:

• Assist with the installation of conduit, cable trays, and shipboard wiring
• Perform basic troubleshooting and component replacement
• Install, build, pack, and seal Multi-Cable Transits (MCTs) in accordance with NAVSEA and shipyard specifications
• Help test equipment and systems for functionality and safety
• Interpret basic schematics and diagrams
• Maintain tools and equipment in good working condition
• Support safety initiatives and maintain a clean work area

Qualifications:

• 2–4 years of marine electrical experience
• Ability to follow schematics and supervisor instructions
• Knowledge of MCT systems such as Roxtec, Nelson, or equivalent
• Basic knowledge of testing equipment and shipboard electrical systems
• Familiar with safety procedures in a shipyard environment

Marine Electrician – I

Position Summary:
The Marine Electrician I is a position focused on gaining experience in shipboard electrical work. This role includes hands-on assistance with installations, pulling cable, and prepping components under close supervision.

Key Responsibilities:

• Pull cable and assist with cable routing and termination prep
• Install, build, pack, and seal Multi-Cable Transits (MCTs) in accordance with NAVSEA and shipyard specifications
• Set up job materials and tools
• Clean and prep areas for electrical installations
• Shadow senior electricians and learn industry practices
• Follow all safety protocols and contribute to a safe work environment

Qualifications:

• 1–2 years of electrical experience (marine experience preferred)
• Knowledge of MCT systems such as Roxtec, Nelson, or equivalent
• Willingness to learn and take direction
• Basic understanding of hand and power tools
• High school diploma or equivalent

Position Summary

Responsible for developing, scheduling, and tracking tests and inspections; inspecting in-process and final craft work; and ensuring documentation aligns with test and inspection plans per Quality Department standards.

Key Responsibilities

• Develop and administer test/inspection plans per quality and contract requirements (e.g., NAVSEA, USCG, classification societies).
• Coordinate with supervision, crafts, and regulatory agencies.
• Ensure all inspections meet contract specs before final regulatory sign-off.
• Monitor workmanship for compliance with applicable standards and shipbuilding practices.
• Ensure calibration of gauges/instruments.
• Report deficiencies via IDRs, QDRs, and NCS per QMS.
• Support development of test memos and process control procedures.
• Train supervisors and test directors on inspection requirements.
• Verify subcontractor qualifications and QA submittals.
• Review external QA requirements to ensure compliance without exceeding contract scope.
• Ensure blasting and coating activities meet regulatory, code, and manufacturer standards.
• Confirm employee certifications and competency for assigned tasks.
• Perform random material compliance checks.

Qualifications

Required Experience:

• 2+ years of marine coatings inspection experience

Required Certifications:

• NACE or SSPC Coatings Inspector (Level 1+ preferred)
• NBPI Certification (for US Navy projects)
• Valid Driver’s License

Required Skills:

• Proficient with SSPC/NACE standards and marine inspection tools
• Strong knowledge of ship repair, class society surveying, and inspection practices
• Ability to read/interpret complex contracts, specs, and drawings
• Excellent communication, planning, and documentation skills
• Proficient in MS Office and QA databases
• Strong customer service and conflict resolution abilities

Physical & Work Environment

• Shipyard setting with exposure to noise, weather, confined spaces, and production areas
• Frequent walking, climbing, bending, lifting (up to 50 lbs)

EOE/M/F/AA/Disability/Vet | Drug-Free Workplace

Key Responsibilities:

• Surface Preparation: Prep and level surfaces for tile installation.
• Tile Installation: Measure, fit, and install composite tiles on submarines.
• Caulking & Finishing: Apply caulk and finishing touches to ensure durability and slip resistance.
• Repairs & Maintenance: Remove damaged tiles, replace caulking, and repair tiles.
• Quality Control & Compliance: Ensure all work adheres to shipyard specifications, safety regulations, and maritime industry standards.
• Safety & Worksite Maintenance: Follow strict shipyard safety protocols, wear proper PPE, and maintain a clean, organized workspace.

Preferred Experience & Skills:

• Commercial Carpentry: Experience working on large-scale construction or renovation projects.
• Tile Installation: Proficiency in installing ceramic or composite tile in high-traffic or industrial environments.
• Industrial or Shipyard Experience: Familiarity with working in shipyards, manufacturing plants, or other industrial settings.
• Blueprint Reading: Ability to interpret technical drawings and ship specifications when needed.
• Tool Proficiency: Skilled in using manual tools, power tools, and carpentry equipment.
• Physical Stamina: Capable of lifting materials, kneeling for extended periods, and working in confined shipboard spaces.
• DBIDS Eligibility: Ability to pass background screening for access to military shipyards, including NNSY and HII.
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

📢 Apply Today! Competitive pay based on experience, with opportunities for advancement in shipboard finishing trades!

Avail Staffing Company is an EEO employer - M/F/Vets/Disabled

Ready to build a career in shipboard trades? We’re hiring motivated candidates with Tile Installing and Carpenter backgounds to join our shipyard team, working on cutting-edge naval and commercial vessels. In this role, you’ll craft high-quality tile surfaces aboard ships and submarines while learning specialized skills in SHT Tile Installation – essential for nuclear-powered submarines. This is more than just a job – it’s a hands-on opportunity to work on critical projects, grow your expertise, and enjoy competitive pay.

What You’ll Do:

• Surface Preparation: Prep, level, and smooth subfloors for optimal tile installation.
• Precision Tile Installation: Measure, cut, and install composite tiles in submarines and ship compartments.
• Caulking & Finishing: Apply caulk and finishing touches for long-lasting, slip-resistant surfaces.
• Tile Repair & Replacement: Replace damaged tiles, caulking, and repair surfaces as needed.
• Quality Control: Ensure all work meets shipyard specifications, safety protocols, and maritime standards.
• Maintain Safety & Cleanliness: Follow shipyard safety procedures, wear proper PPE, and keep the workspace organized.

What We’re Looking For:

• Carpentry Experience: Previous work in commercial carpentry or large-scale construction.
• Tile Installation Skills: Proficiency in installing ceramic or composite tiles in high-traffic, industrial, or shipboard environments.
• Industrial/Shipyard Experience: Experience working in shipyards, manufacturing plants, or industrial settings is a plus.
• Blueprint Reading: Ability to read and interpret technical drawings and ship specifications.
• Tool Proficiency: Skilled with manual and power tools (saws, drills, tile cutters, and more).
• Physical Stamina: Comfortable lifting materials, kneeling, and working in tight shipboard spaces.
• DBIDS Eligibility: Ability to pass a background check for access to military shipyards (NNSY, HII).
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

Why Join Us?

• Competitive Pay: Based on experience, with room for growth.
• Career Advancement: Learn specialized SHT Tile Installation skills for submarines.
• Exciting Work Environment: Work on high-profile shipbuilding and repair projects.
• Skill-Building Opportunities: Enhance your carpentry, tiling, and finishing trades expertise.

🔧 Don’t miss the chance to launch or advance your career in shipboard finishing trades. Apply now and become part of our skilled, safety-focused team!

Avail Staffing Company is an Equal Opportunity Employer – M/F/Vets/Disabled.

Key Responsibilities:

• Surface Preparation: Prep and level surfaces for tile installation.
• Tile Installation: Measure, fit, and install composite tiles on submarines.
• Caulking & Finishing: Apply caulk and finishing touches to ensure durability and slip resistance.
• Repairs & Maintenance: Remove damaged tiles, replace caulking, and repair tiles.
• Quality Control & Compliance: Ensure all work adheres to shipyard specifications, safety regulations, and maritime industry standards.
• Safety & Worksite Maintenance: Follow strict shipyard safety protocols, wear proper PPE, and maintain a clean, organized workspace.

Preferred Experience & Skills:

• Commercial Carpentry: Experience working on large-scale construction or renovation projects.
• Tile Installation: Proficiency in installing ceramic or composite tile in high-traffic or industrial environments.
• Industrial or Shipyard Experience: Familiarity with working in shipyards, manufacturing plants, or other industrial settings.
• Blueprint Reading: Ability to interpret technical drawings and ship specifications when needed.
• Tool Proficiency: Skilled in using manual tools, power tools, and carpentry equipment.
• Physical Stamina: Capable of lifting materials, kneeling for extended periods, and working in confined shipboard spaces.
• DBIDS Eligibility: Ability to pass background screening for access to military shipyards, including NNSY and HII.
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

📢 Apply Today! Competitive pay based on experience, with opportunities for advancement in shipboard finishing trades!

Avail Staffing Company is an EEO employer - M/F/Vets/Disabled

Tile Installer & Carpenter – Shipyard Opportunities

Ready to build a career in shipboard trades? We’re hiring motivated candidates with Tile Installing and Carpenter backgounds to join our shipyard team, working on cutting-edge naval and commercial vessels. In this role, you’ll craft high-quality tile surfaces aboard ships and submarines while learning specialized skills in SHT Tile Installation – essential for nuclear-powered submarines. This is more than just a job – it’s a hands-on opportunity to work on critical projects, grow your expertise, and enjoy competitive pay.

What You’ll Do:

• Surface Preparation: Prep, level, and smooth subfloors for optimal tile installation.
• Precision Tile Installation: Measure, cut, and install composite tiles in submarines and ship compartments.
• Caulking & Finishing: Apply caulk and finishing touches for long-lasting, slip-resistant surfaces.
• Tile Repair & Replacement: Replace damaged tiles, caulking, and repair surfaces as needed.
• Quality Control: Ensure all work meets shipyard specifications, safety protocols, and maritime standards.
• Maintain Safety & Cleanliness: Follow shipyard safety procedures, wear proper PPE, and keep the workspace organized.

What We’re Looking For:

• Carpentry Experience: Previous work in commercial carpentry or large-scale construction.
• Tile Installation Skills: Proficiency in installing ceramic or composite tiles in high-traffic, industrial, or shipboard environments.
• Industrial/Shipyard Experience: Experience working in shipyards, manufacturing plants, or industrial settings is a plus.
• Blueprint Reading: Ability to read and interpret technical drawings and ship specifications.
• Tool Proficiency: Skilled with manual and power tools (saws, drills, tile cutters, and more).
• Physical Stamina: Comfortable lifting materials, kneeling, and working in tight shipboard spaces.
• DBIDS Eligibility: Ability to pass a background check for access to military shipyards (NNSY, HII).
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

Why Join Us?

• Competitive Pay: Based on experience, with room for growth.
• Career Advancement: Learn specialized SHT Tile Installation skills for submarines.
• Exciting Work Environment: Work on high-profile shipbuilding and repair projects.
• Skill-Building Opportunities: Enhance your carpentry, tiling, and finishing trades expertise.

Don’t miss the chance to launch or advance your career in shipboard finishing trades. Apply now and become part of our skilled, safety-focused team!

Avail Staffing Company is an Equal Opportunity Employer – M/F/Vets/Disabled.

*Candidates must pass a stick weld test in 2g, 3g, and 4g positions.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: Minimum 5+ years of welding experience in a shipyard environment.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.Top of Form

*Candidates must pass a stick weld test in 2g, 3g, and 4g positions.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: Minimum 5+ years of welding experience in a shipyard environment.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.Top of Form

*Candidates must pass a stick weld test in 2g, 3g, and 4g positions.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: Minimum 5+ years of welding experience in a shipyard environment.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.

Send resumes to: jobs@availstaffing.net

At Avails Staffing, we’re more than just a workplace; we’re a family committed to craftsmanship, teamwork, and mutual success. We are looking for skilled Marine Insulators to join our crew and help build and maintain the vessels that power the future. If you take pride in your work and thrive in a supportive team environment, we want to hear from you!

What You'll Do as Part of Our Crew:
As a Marine Insulator, you will:

• Apply insulation and coverings to piping, machinery, and systems for water, AC, refrigeration, and steam machinery.
• Insulate bulkheads and overheads using rubber, fiberglass hullboard, fiberglass pipe sections, calcium silicate, fiberglass tape/cloth, adhesives, and Tempmatt.
• Read and interpret blueprints to execute projects with precision.
• Utilize hand tools and equipment, such as knives, wire cutters, saws, tape measures, band saws, and stud guns, effectively.
• Design and install customized insulation systems tailored to specific applications.
• Apply lagging cloth with accuracy and craftsmanship.

What We’re Looking For:
To succeed in this role, you should have:

• Shipyard Experience: 3-5 years of hands-on marine insulation work.
• Attention to Detail: Expertise with various insulation materials and their applications.
• Dependability: Reliable transportation and a commitment to being punctual.
• Flexibility: Willingness to work in inclement weather, early mornings, nights, weekends, and holidays as needed.
• Team Spirit: The ability to work both independently and as part of a team.
• Integrity: Ability to pass a background check.

Why Join Us?

• Full-Time and Contract Opportunities to match your career goals.
• Supportive Work Environment where your contributions are valued and recognized.
• Opportunity for Growth in a company that invests in its people.
• A Family-Oriented Culture where teamwork and respect come first.

Ready to Set Sail with Us?
Become part of a team that values your expertise and dedication. We’re ready to welcome you into the Avails Staffing family! Apply today to embark on a rewarding career in marine insulation.

Marine Electrician - III

Position Summary:
As a Marine Electrician, you will be responsible for the installation, troubleshooting, maintenance, and repair of complex electrical systems aboard naval and commercial vessels. You are expected to work independently with minimal supervision and mentor junior electricians as needed.

Key Responsibilities:

• Install and test high/low voltage shipboard electrical systems (power generation, lighting, motors, switchboards)
• Read and interpret blueprints, schematics, and electrical diagrams
• Troubleshoot and repair electrical issues using diagnostic tools
• Perform terminations, splicing, and cable pulls
• Conduct continuity, insulation resistance, and operational tests
• Ensure compliance with NAVSEA, OSHA, and company safety standards
• Lead small crews or assist foremen in project execution

Qualifications:

• 5+ years of marine electrical experience
• Strong blueprint/schematic reading skills
• Proficient with multimeters, meggers, and other diagnostic tools
• Familiarity with MIL-SPEC standards and shipboard cable types

Marine Electrician – II

Position Summary:
The 2nd Class Marine Electrician is responsible for supporting the installation and repair of shipboard electrical systems under the guidance of senior electricians. This role requires a good working knowledge of standard practices and tools.

Key Responsibilities:

• Assist with the installation of conduit, cable trays, and shipboard wiring
• Perform basic troubleshooting and component replacement
• Help test equipment and systems for functionality and safety
• Interpret basic schematics and diagrams
• Maintain tools and equipment in good working condition
• Support safety initiatives and maintain a clean work area

Qualifications:

• 2–4 years of marine electrical experience
• Ability to follow schematics and supervisor instructions
• Basic knowledge of testing equipment and shipboard electrical systems
• Familiar with safety procedures in a shipyard environment

Marine Electrician – I

Position Summary:
The 3rd Class Marine Electrician is an entry-level position focused on gaining experience in shipboard electrical work. This role includes hands-on assistance with installations, pulling cable, and prepping components under close supervision.

Key Responsibilities:

• Pull cable and assist with cable routing and termination prep
• Set up job materials and tools
• Clean and prep areas for electrical installations
• Shadow senior electricians and learn industry practices
• Follow all safety protocols and contribute to a safe work environment

Qualifications:

• 1–2 years of electrical experience (marine experience preferred)
• Willingness to learn and take direction
• Basic understanding of hand and power tools
• High school diploma or equivalent

We are seeking an experienced Marine Electrician with proven expertise in building, packing, and sealing Multi-Cable Transits (MCTs) aboard naval and commercial vessels. The ideal candidate will have a strong background in shipboard electrical systems, cable installation, and NAVSEA or maritime safety standards. This role requires hands-on technical skill, attention to detail, and the ability to work in confined and industrial shipyard environments.

Key Responsibilities

• Install, build, pack, and seal Multi-Cable Transits (MCTs) in accordance with NAVSEA and shipyard specifications
• Pull, route, support, and terminate electrical, fiber optic, and communication cables through MCTs and ship structures
• Read and interpret electrical blueprints, schematics, cable schedules, and penetration drawings
• Install and secure cableways, hangers, brackets, and penetration hardware
• Perform continuity testing, insulation resistance testing, and basic troubleshooting of shipboard electrical systems
• Ensure fire-stop integrity and watertight sealing of all penetrations
• Label and dress cables to meet shipboard standards and quality requirements
• Follow all safety procedures related to confined spaces, hot work, fall protection, and electrical hazards
• Maintain clean and organized work areas in accordance with shipyard safety policies
• Coordinate with other trades including shipfitters, welders, painters, and engineers
• Document completed work and report discrepancies or deficiencies to supervision

Required Qualifications

• Minimum 3–5 years of experience as a Marine Electrician in a shipyard or maritime environment
• Demonstrated experience building and packing Multi-Cable Transits (MCTs)
• Knowledge of MCT systems such as Roxtec, Nelson, or equivalent
• Ability to read and understand shipboard electrical drawings and specifications
• Experience pulling and terminating power, control, and fiber optic cables
• Familiarity with NAVSEA standards and shipboard installation practices
• Ability to work in confined spaces, at heights, and in physically demanding conditions
• Strong attention to detail and commitment to quality workmanship

Preferred Qualifications

• NAVSEA Cableway or MCT certification
• Fiber optic termination or testing experience
• OSHA 10 or OSHA 30 certification
• Experience aboard U.S. Navy vessels

Physical Requirements

• Ability to lift up to 50 lbs
• Ability to climb ladders, scaffolding, and work in tight spaces
• Comfortable working aboard vessels and shipyard environments

Work Environment

• Shipyards, dry docks, and onboard vessels
• Exposure to noise, dust, weather elements, and industrial hazards
• Use of PPE including hard hats, respirators, and fall protection

Key Responsibilities:

• Pull, route, and secure electrical cables through bulkheads, overheads, and cable trays aboard ships
• Assist with the setup and organization of cable reels, pulleys, and pulling equipment
• Support electricians with cable identification, labeling, and termination prep
• Install cable supports, clamps, and penetrations as required
• Maintain a clean and organized work area while following safety and quality standards
• Ensure cables are protected from damage during installation
• Report any obstructions or issues that could impact routing or cable integrity

Qualifications:

• 0–2 years of experience in electrical or marine environments (shipyard experience preferred)
• Ability to follow written and verbal instructions
• Physically able to lift, pull, and work in confined spaces or elevated areas aboard ships
• Comfortable working in fast-paced, physically demanding environments
• Basic understanding of hand tools and safety procedures
• Must be able to obtain access credentials for shipyard entry (e.g., DBIDS, TWIC)

Preferred Traits:

• Team player with strong communication and problem-solving skills
• Attention to detail and a commitment to quality workmanship
• Prior experience in military or commercial ship repair is a plus

Responsibilities

• Accurately interpret and translate complex blueprints and technical drawings to plan pipe layout and installation sequences within piping systems.
• Cut, bend, and thread pipes using various hand and power tools like pipe cutters, bending machines, and threading machines to achieve precise dimensions.
• Rip out, repair, target, layout, fabricate, install and test marine piping systems onboard ships in various stages of repair and modernization.
• Position and install pipes within designated locations on the ship, ensuring proper alignment and support structures are in place.
• Utilize basic math skills to calculate measurements and material requirements accurately.
• Collaborate with other trades on site to ensure seamless project execution.

Experience

• At least 5+ years experience as a Pipefitter or in a similar role within the shipyard industry is required.
• Strong mechanical knowledge with a focus on pipeline installation and maintenance.
• Familiarity with relevant codes and standards governing piping systems.
• Proficient in using hand and power tools necessary for pipe assembly and installation.
• Ability to work independently as well as part of a team in a fast-paced environment.

If you are a dedicated professional looking for an opportunity to contribute your skills in a dynamic setting, we encourage you to apply for this position as we continue to build quality infrastructure within our community.

Responsibilities

• Accurately interpret and translate complex blueprints and technical drawings to plan pipe layout and installation sequences within piping systems.
• Cut, bend, and thread pipes using various hand and power tools like pipe cutters, bending machines, and threading machines to achieve precise dimensions.
• Rip out, repair, target, layout, fabricate, install and test marine piping systems onboard ships in various stages of repair and modernization.
• Position and install pipes within designated locations on the ship, ensuring proper alignment and support structures are in place.
• Utilize basic math skills to calculate measurements and material requirements accurately.
• Collaborate with other trades on site to ensure seamless project execution.

Experience

• At least 3-5+ years experience as a Pipefitter or in a similar role within the shipyard industry is required.
• Strong mechanical knowledge with a focus on pipeline installation and maintenance.
• Familiarity with relevant codes and standards governing piping systems.
• Proficient in using hand and power tools necessary for pipe assembly and installation.
• Ability to work independently as well as part of a team in a fast-paced environment.

If you are a dedicated professional looking for an opportunity to contribute your skills in a dynamic setting, we encourage you to apply for this position as we continue to build quality infrastructure within our community.

Location: Shipyard / Marine Facilities
Employment Type: Full-Time

Job Description

We are seeking an experienced Marine Electrician with proven expertise in building, packing, and sealing Multi-Cable Transits (MCTs) aboard naval and commercial vessels. The ideal candidate will have a strong background in shipboard electrical systems, cable installation, and NAVSEA or maritime safety standards. This role requires hands-on technical skill, attention to detail, and the ability to work in confined and industrial shipyard environments.

Key Responsibilities

• Install, build, pack, and seal Multi-Cable Transits (MCTs) in accordance with NAVSEA and shipyard specifications

• Pull, route, support, and terminate electrical, fiber optic, and communication cables through MCTs and ship structures

• Read and interpret electrical blueprints, schematics, cable schedules, and penetration drawings

• Install and secure cableways, hangers, brackets, and penetration hardware

• Perform continuity testing, insulation resistance testing, and basic troubleshooting of shipboard electrical systems

• Ensure fire-stop integrity and watertight sealing of all penetrations

• Label and dress cables to meet shipboard standards and quality requirements

• Follow all safety procedures related to confined spaces, hot work, fall protection, and electrical hazards

• Maintain clean and organized work areas in accordance with shipyard safety policies

• Coordinate with other trades including shipfitters, welders, painters, and engineers

• Document completed work and report discrepancies or deficiencies to supervision

Required Qualifications

• Minimum 3–5 years of experience as a Marine Electrician in a shipyard or maritime environment

• Demonstrated experience building and packing Multi-Cable Transits (MCTs)

• Knowledge of MCT systems such as Roxtec, Nelson, or equivalent

• Ability to read and understand shipboard electrical drawings and specifications

• Experience pulling and terminating power, control, and fiber optic cables

• Familiarity with NAVSEA standards and shipboard installation practices

• Ability to work in confined spaces, at heights, and in physically demanding conditions

• Strong attention to detail and commitment to quality workmanship

Preferred Qualifications

• NAVSEA Cableway or MCT certification

• Fiber optic termination or testing experience

• OSHA 10 or OSHA 30 certification

• Experience aboard U.S. Navy vessels

Physical Requirements

• Ability to lift up to 50 lbs

• Ability to climb ladders, scaffolding, and work in tight spaces

• Comfortable working aboard vessels and shipyard environments

Work Environment

• Shipyards, dry docks, and onboard vessels

• Exposure to noise, dust, weather elements, and industrial hazards

• Use of PPE including hard hats, respirators, and fall protection 

  
  

Job Summary

WAF Coordinator with Logistics, Marine Electrical, or CP experience will be prioritized and pay rate will be determined based off experience.  The WAF Coordinator is responsible for administering and controlling the Work Authorization Form (WAF) process to ensure all maintenance, repair, and construction activities are performed safely, efficiently, and in full compliance with shipyard policies, NAVSEA requirements, OSHA regulations, and contractual obligations. This position plays a critical role in coordinating work activities and preventing safety conflicts across multiple trades and departments.

Key Responsibilities

• Review, issue, track, and close Work Authorization Forms for shipboard and facility work.

• Verify that all required permits, certifications, tag-outs, and safety controls are approved prior to authorizing work.

• Ensure compliance with shipyard safety procedures, NAVSEA Standard Items, OSHA regulations, and customer requirements.

• Coordinate daily work activities with production supervisors, safety, quality, and engineering teams.

• Identify potential work conflicts, hazards, and restricted areas and ensure proper mitigation measures are in place.

• Monitor active work areas to confirm work is performed within the approved WAF scope.

• Suspend or revoke WAFs when unsafe conditions, violations, or scope deviations are identified.

• Maintain accurate records, logs, and documentation of all WAF activity.

• Participate in pre-job briefs, safety meetings, and shift turnover meetings.

• Support audits, inspections, and investigations related to work authorization and safety compliance.

• Provide guidance to trades and supervisors regarding WAF procedures and requirements.

Required Qualifications

• Knowledge of shipyard operations and work control processes.

• Familiarity with NAVSEA Standard Items and OSHA safety regulations.

• Ability to read and interpret work packages, technical instructions, and drawings.

• Strong organizational and documentation skills.

• Effective verbal and written communication skills.

• Ability to identify hazards and enforce safety requirements.

Preferred Qualifications

• Prior experience in shipyard production, safety, planning, or quality roles.

• Experience working on U.S. Navy vessels.

• OSHA 10 or OSHA 30 certification.

• Experience with hot work, confined space, tag-out, and energy control procedures.

• Proficiency with electronic work control or maintenance management systems.

Working Conditions

• Work performed aboard ships, in dry docks, and industrial environments.

• Frequent walking, climbing ladders, and working in confined spaces.

• May require shift work, overtime, and weekend coverage.

• Must adhere to PPE and safety requirements at all times.

Equal Opportunity Employer

We are an equal opportunity employer and value diversity in our workforce. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, or veteran status.

Are you an experienced Outside Machinist looking for a hands-on role in ship repair? Avail Staffing is seeking skilled professionals to support the repair of U.S. Naval vessels in Hampton Roads. If you have 5+ years of experience working on ABS or NAVSEA-certified vessels, we want you on our team!

What You’ll Do:

Remove, repair, overhaul, install, and align main propulsion machinery and auxiliary equipment, including:

• Compressors, condensers, pumps, and forced draft blowers
• Cargo handling machinery, anchor gear, cranes, and davits
• Elevators, conveyors, firefighting systems, and more

Install and repair foundations for ship machinery and major components of ship armament.

Test and inspect installed machinery and equipment during dock and sea trials.

Use precision tools such as calipers, micrometers, height/depth gauges, and assist with optical equipment.

Work from blueprints, schematics, and technical documents to execute high-quality installations and repairs.

Why Join Us?

Competitive Pay: $26 - $32 per hour
Full-time, long-term contract work (40-50 hours per week, 6 months)
Referral Program

Requirements:

Minimum 5+ years of shipyard experience on ABS/NAVSEA vessels
Willingness to work day shifts, overtime, and weekends as needed

Apply Today! Take your career to the next level with a company that values your skills and experience. A recruiter will reach out to you within 24 hours!

Tile Installer & Carpenter – Shipyard Opportunities

Ready to build a career in shipboard trades? We’re hiring motivated candidates with Tile Installing and Carpenter backgounds to join our shipyard team, working on cutting-edge naval and commercial vessels. In this role, you’ll craft high-quality tile surfaces aboard ships and submarines while learning specialized skills in SHT Tile Installation – essential for nuclear-powered submarines. This is more than just a job – it’s a hands-on opportunity to work on critical projects, grow your expertise, and enjoy competitive pay.

What You’ll Do:

• Surface Preparation: Prep, level, and smooth subfloors for optimal tile installation.
• Precision Tile Installation: Measure, cut, and install composite tiles in submarines and ship compartments.
• Caulking & Finishing: Apply caulk and finishing touches for long-lasting, slip-resistant surfaces.
• Tile Repair & Replacement: Replace damaged tiles, caulking, and repair surfaces as needed.
• Quality Control: Ensure all work meets shipyard specifications, safety protocols, and maritime standards.
• Maintain Safety & Cleanliness: Follow shipyard safety procedures, wear proper PPE, and keep the workspace organized.

What We’re Looking For:

• Carpentry Experience: Previous work in commercial carpentry or large-scale construction.
• Tile Installation Skills: Proficiency in installing ceramic or composite tiles in high-traffic, industrial, or shipboard environments.
• Industrial/Shipyard Experience: Experience working in shipyards, manufacturing plants, or industrial settings is a plus.
• Blueprint Reading: Ability to read and interpret technical drawings and ship specifications.
• Tool Proficiency: Skilled with manual and power tools (saws, drills, tile cutters, and more).
• Physical Stamina: Comfortable lifting materials, kneeling, and working in tight shipboard spaces.
• DBIDS Eligibility: Ability to pass a background check for access to military shipyards (NNSY, HII).
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

Why Join Us?

• Competitive Pay: Based on experience, with room for growth.
• Career Advancement: Learn specialized SHT Tile Installation skills for submarines.
• Exciting Work Environment: Work on high-profile shipbuilding and repair projects.
• Skill-Building Opportunities: Enhance your carpentry, tiling, and finishing trades expertise.

🔧 Don’t miss the chance to launch or advance your career in shipboard finishing trades. Apply now and become part of our skilled, safety-focused team!

Avail Staffing Company is an Equal Opportunity Employer – M/F/Vets/Disabled.

Marine Electrician – III

Position Summary:
As a Marine Electrician, you will be responsible for the installation, troubleshooting, maintenance, and repair of complex electrical systems aboard naval and commercial vessels. You are expected to work independently with minimal supervision and mentor junior electricians as needed.

Key Responsibilities:

• Install and test high/low voltage shipboard electrical systems (power generation, lighting, motors, switchboards)
• Read and interpret blueprints, schematics, and electrical diagrams
• Troubleshoot and repair electrical issues using diagnostic tools
• Perform terminations, splicing, and cable pulls
• Conduct continuity, insulation resistance, and operational tests
• Ensure compliance with NAVSEA, OSHA, and company safety standards
• Lead small crews or assist foremen in project execution

Qualifications:

• 5+ years of marine electrical experience
• Strong blueprint/schematic reading skills
• Proficient with multimeters, meggers, and other diagnostic tools
• Familiarity with MIL-SPEC standards and shipboard cable types

Marine Electrician – II

Position Summary:
The 2nd Class Marine Electrician is responsible for supporting the installation and repair of shipboard electrical systems under the guidance of senior electricians. This role requires a good working knowledge of standard practices and tools.

Key Responsibilities:

• Assist with the installation of conduit, cable trays, and shipboard wiring
• Perform basic troubleshooting and component replacement
• Help test equipment and systems for functionality and safety
• Interpret basic schematics and diagrams
• Maintain tools and equipment in good working condition
• Support safety initiatives and maintain a clean work area

Qualifications:

• 2–4 years of marine electrical experience
• Ability to follow schematics and supervisor instructions
• Basic knowledge of testing equipment and shipboard electrical systems
• Familiar with safety procedures in a shipyard environment

Marine Electrician – I

Position Summary:
The 3rd Class Marine Electrician is an entry-level position focused on gaining experience in shipboard electrical work. This role includes hands-on assistance with installations, pulling cable, and prepping components under close supervision.

Key Responsibilities:

• Pull cable and assist with cable routing and termination prep
• Set up job materials and tools
• Clean and prep areas for electrical installations
• Shadow senior electricians and learn industry practices
• Follow all safety protocols and contribute to a safe work environment

Qualifications:

• 1–2 years of electrical experience (marine experience preferred)
• Willingness to learn and take direction
• Basic understanding of hand and power tools
• High school diploma or equivalent

Position Summary

Responsible for developing, scheduling, and tracking tests and inspections; inspecting in-process and final craft work; and ensuring documentation aligns with test and inspection plans per Quality Department standards.

Key Responsibilities

• Develop and administer test/inspection plans per quality and contract requirements (e.g., NAVSEA, USCG, classification societies).
• Coordinate with supervision, crafts, and regulatory agencies.
• Ensure all inspections meet contract specs before final regulatory sign-off.
• Monitor workmanship for compliance with applicable standards and shipbuilding practices.
• Ensure calibration of gauges/instruments.
• Report deficiencies via IDRs, QDRs, and NCS per QMS.
• Support development of test memos and process control procedures.
• Train supervisors and test directors on inspection requirements.
• Verify subcontractor qualifications and QA submittals.
• Review external QA requirements to ensure compliance without exceeding contract scope.
• Ensure blasting and coating activities meet regulatory, code, and manufacturer standards.
• Confirm employee certifications and competency for assigned tasks.
• Perform random material compliance checks.

Qualifications

Required Experience:

• 2+ years of marine coatings inspection experience

Required Certifications:

• NACE or SSPC Coatings Inspector (Level 1+ preferred)
• NBPI Certification (for US Navy projects)
• Valid Driver’s License

Required Skills:

• Proficient with SSPC/NACE standards and marine inspection tools
• Strong knowledge of ship repair, class society surveying, and inspection practices
• Ability to read/interpret complex contracts, specs, and drawings
• Excellent communication, planning, and documentation skills
• Proficient in MS Office and QA databases
• Strong customer service and conflict resolution abilities

Physical & Work Environment

• Shipyard setting with exposure to noise, weather, confined spaces, and production areas

Frequent walking, climbing, bending, lifting (up to 50 lbs)

Contact us at 757-292-2323 or email your resume to jobs@availstaffing.net

EOE/M/F/AA/Disability/Vet | Drug-Free Workplace

Tile Installer & Carpenter – Shipyard Opportunities

Ready to build a career in shipboard trades? We’re hiring motivated candidates with Tile Installing and Carpenter backgounds to join our shipyard team, working on cutting-edge naval and commercial vessels. In this role, you’ll craft high-quality tile surfaces aboard ships and submarines while learning specialized skills in SHT Tile Installation – essential for nuclear-powered submarines. This is more than just a job – it’s a hands-on opportunity to work on critical projects, grow your expertise, and enjoy competitive pay.

What You’ll Do:

• Surface Preparation: Prep, level, and smooth subfloors for optimal tile installation.
• Precision Tile Installation: Measure, cut, and install composite tiles in submarines and ship compartments.
• Caulking & Finishing: Apply caulk and finishing touches for long-lasting, slip-resistant surfaces.
• Tile Repair & Replacement: Replace damaged tiles, caulking, and repair surfaces as needed.
• Quality Control: Ensure all work meets shipyard specifications, safety protocols, and maritime standards.
• Maintain Safety & Cleanliness: Follow shipyard safety procedures, wear proper PPE, and keep the workspace organized.

What We’re Looking For:

• Carpentry Experience: Previous work in commercial carpentry or large-scale construction.
• Tile Installation Skills: Proficiency in installing ceramic or composite tiles in high-traffic, industrial, or shipboard environments.
• Industrial/Shipyard Experience: Experience working in shipyards, manufacturing plants, or industrial settings is a plus.
• Blueprint Reading: Ability to read and interpret technical drawings and ship specifications.
• Tool Proficiency: Skilled with manual and power tools (saws, drills, tile cutters, and more).
• Physical Stamina: Comfortable lifting materials, kneeling, and working in tight shipboard spaces.
• DBIDS Eligibility: Ability to pass a background check for access to military shipyards (NNSY, HII).
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

Why Join Us?

• Competitive Pay: Based on experience, with room for growth.
• Career Advancement: Learn specialized SHT Tile Installation skills for submarines.
• Exciting Work Environment: Work on high-profile shipbuilding and repair projects.
• Skill-Building Opportunities: Enhance your carpentry, tiling, and finishing trades expertise.

🔧 Don’t miss the chance to launch or advance your career in shipboard finishing trades. Apply now and become part of our skilled, safety-focused team!

Avail Staffing Company is an Equal Opportunity Employer – M/F/Vets/Disabled.

We are seeking a certified AWS D1.5 & D1.3 Welder to join our team, specializing in rebar, tension cables, and sheet metal welding, including Stay-in-Place (SIP) deck pans using galvanized steel. This position involves structural and bridge construction projects, requiring strict adherence to AWS D1.5 (Bridge Welding Code) and D1.3 (Sheet Steel Welding Code) standards.

The ideal D1.5-certified welder should have experience with reinforcement steel (rebar) and post-tension cables and the ability to read and interpret blueprints. D1.3-certified welders must demonstrate proficiency in sheet metal welding but are not required to read blueprints.

Key Responsibilities:

-Perform structural welding on rebar, tension cables, SIP/deck pans, and sheet metal in compliance with AWS D1.5 and D1.3 codes.
-Weld galvanized steel SIP/deck pans using proper techniques to prevent warping or burn-through.
-(For D1.5-certified welders) Read and interpret blueprints, schematics, and welding symbols for precise execution.
-Utilize SMAW, FCAW, or GMAW welding processes based on project requirements.
-Inspect and repair welds to meet quality and structural integrity standards.
-Follow strict safety protocols, including PPE usage and proper ventilation when welding galvanized materials.
-Work in coordination with engineers, ironworkers, and project managers to complete welding tasks efficiently.
-Maintain and troubleshoot welding equipment to ensure optimal performance.

Qualifications & Skills:

AWS D1.5 & D1.3 Certifications – Required
Ability to read and interpret blueprints – Required for D1.5 welders (not required for D1.3 welders)
Proven experience in rebar, tension cable, SIP/deck pan, and sheet metal welding
Strong knowledge of welding codes, safety regulations, and proper techniques for galvanized steel
Proficiency in SMAW, FCAW, or GMAW welding processes
Ability to work in elevated heights, confined spaces, and varying environmental conditions
Attention to detail, safety, and quality craftsmanship
MUST BE AT LEAST 25 YEARS OLD SINCE YOU WILL NEED TO OPERATE A COMPANY VEHICLE

Why Join Us?

Competitive pay & benefits
Work on major infrastructure and bridge projects
Opportunities for career growth & development
Strong safety culture & supportive team environment

Apply Today! If you're an AWS D1.5 & D1.3 Certified Welder with experience in SIP/deck pan welding, we want to hear from you!

Avail Staffing Company is an EEO employer - M/F/Vets/Disabled

Avail Staffing is currently seeking an experienced and CERTIFIED PCMS Tile Installer to join our marine insulation team. This role focuses on the installation of Preformed Compartmented Maintenance System (PCMS) acoustic tiles aboard U.S. Navy and commercial vessels. The installer will be responsible for accurately fitting, cutting, adhering, and finishing PCMS tiles in compartments to meet military specifications for sound dampening and thermal insulation.

**MUST HAVE PCMS CERTIFICATION FOR THIS POSITION

Key Responsibilities

• Install PCMS acoustic tiles on overheads, bulkheads, and other designated areas aboard ships and submarines.
• Measure and cut tiles to fit around obstructions such as piping, ductwork, or electrical conduits.
• Apply adhesives and mechanical fasteners in accordance with engineering drawings and military specifications.
• Lay out installation locations using blueprints, work packages, or direction from supervisors.
• Ensure proper alignment, bonding, and finish of tiles for long-lasting performance and structural integrity.
• Prepare surfaces for installation, including cleaning and roughing as required.
• Repair or replace damaged PCMS tiles and assist with tile removal as necessary.
• Follow safety procedures and use PPE in confined spaces and elevated work areas.
• Maintain work area cleanliness and comply with environmental and safety regulations.
• Collaborate with team members to ensure project timelines and quality expectations are met.

Qualifications

• High school diploma or GED required.
• 1+ year of experience in marine insulation or shipboard PCMS tile installation preferred.
• Ability to read and interpret technical drawings, installation manuals, and job specifications.
• Strong understanding of adhesives, fasteners, and insulation installation techniques.
• Familiarity with tools used in tile work such as utility knives, straight edges, tape measures, drills, and adhesives.
• Comfortable working in confined spaces, on ladders, scaffolding, and in variable shipboard environments.

Preferred Skills

• Experience working aboard Navy ships or submarines.
• Knowledge of NAVSEA standards and military specifications for insulation work.
• OSHA 10/30 Maritime, Confined Space, or Fire Watch certifications are a plus.
• Strong attention to detail and a commitment to craftsmanship.

Physical Requirements

• Ability to lift 50 pounds unassisted.
• Capable of standing, bending, kneeling, and climbing for extended periods.
• Comfortable working in confined or elevated spaces in a shipyard environment.

*Candidates may need to pass a weld test.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: 5+ years of welding experience in a shipyard environment to be eligible for 1st Class, all other Classes will be commensurate with experience.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification
• Ability to obtain a DBIDS

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.Top of Form

Duties

• Performing repairs and modernization tasks independently with minimal oversight.
• Applying strong mechanical skills while following precise job specifications.
• Interpreting blueprints, analyzing drawings, and taking accurate measurements.
• Creating templates and assembling structures in compliance with specifications.

Skills

• Minimum of 5+ years in the role of a Ship Fitter in a shipyard environment.  May consider candidates with less depending on type of experience.
• Excellent ability to understand instructions, technical drawings, and written communication.
• Comprehensive knowledge of ship repair terminology and compartment location designations.
• Strong communication skills for effectively sharing job-related details with supervisors and team members.
• Proficient in reading and interpreting structural drawings, including weld symbols and Navy damage control diagrams.
• Experienced in fabricating templates, aligning plates, and installing perpendiculars on vessels.
• Skilled in oxy-acetylene torch cutting and washing techniques.
• Adept at safely handling hand and power tools, including grinders, saws, and drills.
• Familiarity with structural shop fabrication equipment, including shears, punches, and brakes.
• Familiarity with sheet metal work is highly desirable.
• Strong mathematical skills for precise measurements in both US standard and metric systems.

If you are passionate about shipbuilding and possess the necessary skills, we invite you to apply for this exciting opportunity as a Shipfitter!

Key Responsibilities:

• Surface Preparation: Prep and level surfaces for tile installation.
• Tile Installation: Measure, fit, and install composite tiles on submarines.
• Caulking & Finishing: Apply caulk and finishing touches to ensure durability and slip resistance.
• Repairs & Maintenance: Remove damaged tiles, replace caulking, and repair tiles.
• Quality Control & Compliance: Ensure all work adheres to shipyard specifications, safety regulations, and maritime industry standards.
• Safety & Worksite Maintenance: Follow strict shipyard safety protocols, wear proper PPE, and maintain a clean, organized workspace.

Preferred Experience & Skills:

• Commercial Carpentry: Experience working on large-scale construction or renovation projects.
• Tile Installation: Proficiency in installing ceramic or composite tile in high-traffic or industrial environments.
• Industrial or Shipyard Experience: Familiarity with working in shipyards, manufacturing plants, or other industrial settings.
• Blueprint Reading: Ability to interpret technical drawings and ship specifications when needed.
• Tool Proficiency: Skilled in using manual tools, power tools, and carpentry equipment.
• Physical Stamina: Capable of lifting materials, kneeling for extended periods, and working in confined shipboard spaces.
• DBIDS Eligibility: Ability to pass background screening for access to military shipyards, including NNSY and HII.
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

Apply Today! Competitive pay based on experience, with opportunities for advancement in shipboard finishing trades!

Avail Staffing Company is an EEO employer - M/F/Vets/Disabled

Duties

• Performing repairs and modernization tasks independently with minimal oversight.
• Applying strong mechanical skills while following precise job specifications.
• Interpreting blueprints, analyzing drawings, and taking accurate measurements.
• Creating templates and assembling structures in compliance with specifications.

Skills

• Minimum of 5+ years in the role of a Ship Fitter in a shipyard environment is required.
• Excellent ability to understand instructions, technical drawings, and written communication.
• Comprehensive knowledge of ship repair terminology and compartment location designations.
• Strong communication skills for effectively sharing job-related details with supervisors and team members.
• Proficient in reading and interpreting structural drawings, including weld symbols and Navy damage control diagrams.
• Experienced in fabricating templates, aligning plates, and installing perpendiculars on vessels.
• Skilled in oxy-acetylene torch cutting and washing techniques.
• Adept at safely handling hand and power tools, including grinders, saws, and drills.
• Familiarity with structural shop fabrication equipment, including shears, punches, and brakes.
• Familiarity with sheet metal work is highly desirable.
• Strong mathematical skills for precise measurements in both US standard and metric systems.

If you are passionate about shipbuilding and possess the necessary skills, we invite you to apply for this exciting opportunity as a Shipfitter!

*Candidates may need to pass a weld test.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: 5+ years of welding experience in a shipyard environment to be eligible for 1st Class, all other will be commensurate with experience.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification
• Ability to obtain a DBIDS

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.Top of Form

*Candidates may need to pass a weld test.

**Experienced Aluminum Welders are always highly encouraged to apply.

Responsibilities:

• Blueprint Interpretation: Read and follow technical drawings to determine welding procedures and measurements.
• Metal Preparation: Cut, grind, and prep metal components for welding.
• Welding Operations: Utilize SMAW, GMAW, and FCAW techniques to join metal parts.
• Quality Control: Inspect welds for defects and ensure compliance with quality standards.
• Fitting & Alignment: Precisely position and align components for structural integrity.
• Safety Compliance: Follow all safety regulations, wear protective gear, and handle hazardous materials properly.
• Confined Space Work: Operate in tight areas within ship hulls using specialized equipment.

Required Skills & Qualifications:

• Experience: Minimum 5+ years of welding experience in a shipyard environment.
• Certifications: Proficiency in various welding techniques with required certifications.
• Blueprint Reading: Ability to interpret complex technical drawings.
• Metal Fabrication: Competency in cutting and shaping metal.
• Physical Stamina: Endurance to perform physically demanding tasks, including heavy lifting.
• Attention to Detail: Precision in ensuring weld quality and structural soundness.
• Shipyard Setting: Outdoor work with exposure to weather and noise.
• Confined Spaces: Operating in tight quarters within the ship's structure.
• Elevated Heights: Welding in high areas as required.

Other Certifications:

• OSHA 10 Training Certification
• Ability to obtain a DBIDS

Join our team and contribute your welding expertise to critical shipbuilding and repair projects in a challenging and rewarding environment.Top of Form

What We’re Looking For

We’re seeking professionals with mastery in:

• Blueprint reading and schematic interpretation
• Stick welding, flux core, TIG, and MIG welding techniques
• Experienced Aluminum Welders are highly encouraged to apply!

What You’ll Do

• Bring shipyard projects to life by interpreting blueprints, schematics, and welding codes
• Perform high-quality structural welding with precision, using techniques like FCAW and stick welding

The Details

• Work settings: Shipyard or shop
• Weld Test: A hands-on test is required to demonstrate your skills

Your Skill Set

• Advanced blueprint reading and schematic interpretation
• Solid math skills for precise measurements and calculations
• Expertise in FCAW welding techniques and stick welding
• Strong soldering abilities

If you’re passionate about your craft and eager to work on projects that make a difference, this is your opportunity to thrive in an essential industry.

Apply now and let your welding skills shine with Avail Staffing!

Avail Staffing has an IMMEDIATE need for skilled Marine Insulators to join our team. This position is responsible for the installation, maintenance, and repair of insulation systems aboard naval and commercial vessels. The ideal candidates will have experience working in shipboard environments and be knowledgeable in various insulation materials and methods.

Key Responsibilities

• Measure, cut, and install insulation materials (fiberglass, foam, calcium silicate, mineral wool, etc.) on pipes, ducts, bulkheads, tanks, and equipment aboard ships.
• Fabricate and install insulation blankets, pads, and covers to fit complex shapes and systems.
• Use hand tools, power tools, and insulation-related equipment such as banding tools and sewing machines.
• Apply vapor barriers, jacketing (aluminum or stainless steel), and mastic coatings to ensure fire, heat, and moisture resistance.
• Follow blueprints, drawings, and work specifications to determine insulation requirements.
• Remove old or damaged insulation and properly dispose of materials in accordance with safety and environmental protocols.
• Maintain a clean, safe, and organized work area, following shipyard safety regulations and PPE requirements.

Qualifications

• High school diploma or GED required.
• Minimum 2 years of experience in marine or industrial insulation.
• Ability to read and interpret technical drawings and specifications.
• Proficient in the use of hand tools and insulation installation equipment.
• Must be physically able to climb, lift up to 50 lbs, and work in confined or elevated spaces aboard ships.
• Strong attention to detail and safety awareness.

Qualifications

• Prior experience in naval ship repair or shipbuilding environments.
• Familiarity with NAVSEA standards and military insulation specifications.
• OSHA 10 certification.
• Experience working in active shipyard or government contract environments.

How to Apply

Please submit your resume through jobs@availstaffing.net. Qualified applicants will be contacted to schedule an interview.

Be a part of a team that helps build and maintain the world’s most advanced marine vessels.

Job Summary:

We are seeking multiple candidates for Ceramic Tile Installer and/or Carpenter to work in a shipyard environment, specializing in the installation and repair of SHT tile surfaces aboard naval and commercial vessels. This role requires a background in tile installation, subfloor preparation, and carpentry, ensuring high-quality craftsmanship while meeting strict maritime safety and industry standards.  This job will provide an opportunity to train as a SHT tile installer, which is responsible for applying specialty tiles on nuclear powered submarines.  This is a Temp-to-Perm position.

Key Responsibilities:

• Surface Preparation: Prep and level surfaces for tile installation.
• Tile Installation: Measure, fit, and install composite tiles on submarines.
• Caulking & Finishing: Apply caulk and finishing touches to ensure durability and slip resistance.
• Repairs & Maintenance: Remove damaged tiles, replace caulking, and repair tiles.
• Quality Control & Compliance: Ensure all work adheres to shipyard specifications, safety regulations, and maritime industry standards.
• Safety & Worksite Maintenance: Follow strict shipyard safety protocols, wear proper PPE, and maintain a clean, organized workspace.

Preferred Experience & Skills:

• Commercial Tile Installation/Carpentry: Experience working on large-scale construction or renovation projects.
• Tile Installation: Proficiency in installing ceramic or composite tile in high-traffic or industrial environments.
• Industrial or Shipyard Experience: Familiarity with working in shipyards, manufacturing plants, or other industrial settings.
• Blueprint Reading: Ability to interpret technical drawings and ship specifications when needed.
• Tool Proficiency: Skilled in using manual tools, power tools, and carpentry equipment.
• Physical Stamina: Capable of lifting materials, kneeling for extended periods, and working in confined shipboard spaces.
• DBIDS Eligibility: Ability to pass background screening for access to military shipyards.
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

📢 Apply Today! Competitive pay based on experience, with opportunities for advancement in shipboard finishing trades!

About the Role:

Avail Staffing is actively seeking a Marine Electrician Technician II with a strong background in shipboard electrical systems. This position is ideal for a motivated individual with intermediate-level expertise in marine electrical installations, troubleshooting, and repair. Join our team and be part of projects that support the U.S. Navy and commercial marine industries.

Key Responsibilities:

• Install, maintain, and repair shipboard electrical equipment and wiring in accordance with NAVSEA standards
• Interpret and work from electrical schematics, blueprints, and work packages
• Run and terminate cabling, install lighting, switches, motors, controllers, and circuit protection
• Conduct continuity checks, insulation resistance tests, and ensure grounding compliance
• Support the setup and testing of control panels and electrical distribution systems
• Work safely in confined spaces, elevated areas, and active shipyard environments
• Collaborate with other trades to ensure efficient and high-quality work

Qualifications:

• 2–4 years of experience as a Marine Electrician in shipyard or naval vessel environments
• Familiar with MIL-SPEC standards and NAVSEA drawing interpretation
• Strong understanding of AC/DC electrical systems and marine cableway practices
• Experience with cable pulling, terminations, testing, and troubleshooting
• Must pass background check and drug screening
• OSHA 10 Maritime, DBIDS preferred or ability to obtain
• Ability to lift up to 50 lbs, work in confined spaces, and stand for extended periods

Benefits of Working with Avail Staffing:

• Competitive weekly pay
• Reliable long-term project
• Opportunities for overtime
• Growth within skilled trades and government contracts

Ready to Advance Your Marine Electrical Career?
-Send your resume to: jobs@availstaffing.net
-Call us: (757) 292-2323
-Apply online at: www.availstaffing.net

Avail Staffing is proud to be an Equal Opportunity Employer. Veterans and experienced shipyard tradespeople are strongly encouraged to apply.

Avail Staffing is currently seeking certified PCMS Tile Installers with current or expired certifications to join our marine insulation team. This role focuses on the installation of Preformed Compartmented Maintenance System (PCMS) acoustic tiles aboard U.S. Navy and commercial vessels. The installer will be responsible for accurately fitting, cutting, adhering, and finishing PCMS tiles in compartments to meet military specifications for sound dampening and thermal insulation.

Key Responsibilities

• Install PCMS acoustic tiles on overheads, bulkheads, and other designated areas aboard ships and submarines.
• Measure and cut tiles to fit around obstructions such as piping, ductwork, or electrical conduits.
• Apply adhesives and mechanical fasteners in accordance with engineering drawings and military specifications.
• Lay out installation locations using blueprints, work packages, or direction from supervisors.
• Ensure proper alignment, bonding, and finish of tiles for long-lasting performance and structural integrity.
• Prepare surfaces for installation, including cleaning and roughing as required.
• Repair or replace damaged PCMS tiles and assist with tile removal as necessary.
• Follow safety procedures and use PPE in confined spaces and elevated work areas.
• Maintain work area cleanliness and comply with environmental and safety regulations.
• Collaborate with team members to ensure project timelines and quality expectations are met.

**MUST HAVE PCMS TILE CERTIFICATION FOR THIS POSITION

Qualifications

• High school diploma or GED required.
• 1+ year of experience in marine insulation or shipboard PCMS tile installation preferred.
• Ability to read and interpret technical drawings, installation manuals, and job specifications.
• Strong understanding of adhesives, fasteners, and insulation installation techniques.
• Familiarity with tools used in tile work such as utility knives, straight edges, tape measures, drills, and adhesives.
• Comfortable working in confined spaces, on ladders, scaffolding, and in variable shipboard environments.

Preferred Skills

• Experience working aboard Navy ships or submarines.
• Knowledge of NAVSEA standards and military specifications for insulation work.
• OSHA 10/30 Maritime, Confined Space, or Fire Watch certifications are a plus.
• Strong attention to detail and a commitment to craftsmanship.

Physical Requirements

• Ability to lift 50 pounds unassisted.
• Capable of standing, bending, kneeling, and climbing for extended periods.
• Comfortable working in confined or elevated spaces in a shipyard

About the Role:

Avail Staffing is actively seeking a Marine Electrician Technician II with a strong background in shipboard electrical systems. This position is ideal for a motivated individual with intermediate-level expertise in marine electrical installations, troubleshooting, and repair. Join our team and be part of projects that support the U.S. Navy and commercial marine industries.

Key Responsibilities:

• Install, maintain, and repair shipboard electrical equipment and wiring in accordance with NAVSEA standards
• Interpret and work from electrical schematics, blueprints, and work packages
• Run and terminate cabling, install lighting, switches, motors, controllers, and circuit protection
• Conduct continuity checks, insulation resistance tests, and ensure grounding compliance
• Support the setup and testing of control panels and electrical distribution systems
• Work safely in confined spaces, elevated areas, and active shipyard environments
• Collaborate with other trades to ensure efficient and high-quality work

Qualifications:

• 2–4 years of experience as a Marine Electrician in shipyard or naval vessel environments
• Familiar with MIL-SPEC standards and NAVSEA drawing interpretation
• Strong understanding of AC/DC electrical systems and marine cableway practices
• Experience with cable pulling, terminations, testing, and troubleshooting
• Must pass background check and drug screening
• OSHA 10 Maritime, DBIDS preferred or ability to obtain
• Ability to lift up to 50 lbs, work in confined spaces, and stand for extended periods

Benefits of Working with Avail Staffing:

• Competitive weekly pay
• Reliable long-term project
• Opportunities for overtime
• Growth within skilled trades and government contracts

Ready to Advance Your Marine Electrical Career?
-Send your resume to: jobs@availstaffing.net
-Call us: (757) 292-2323
-Apply online at: www.availstaffing.net

Avail Staffing is proud to be an Equal Opportunity Employer. Veterans and experienced shipyard tradespeople are strongly encouraged to apply.

Marine Electrician – 1st Class

Position Summary:
As a 1st Class Marine Electrician, you will be responsible for the installation, troubleshooting, maintenance, and repair of complex electrical systems aboard naval and commercial vessels. You are expected to work independently with minimal supervision and mentor junior electricians as needed.

Key Responsibilities:

• Install and test high/low voltage shipboard electrical systems (power generation, lighting, motors, switchboards)
• Read and interpret blueprints, schematics, and electrical diagrams
• Troubleshoot and repair electrical issues using diagnostic tools
• Perform terminations, splicing, and cable pulls
• Conduct continuity, insulation resistance, and operational tests
• Ensure compliance with NAVSEA, OSHA, and company safety standards
• Lead small crews or assist foremen in project execution

Qualifications:

• 5+ years of marine electrical experience
• Strong blueprint/schematic reading skills
• Proficient with multimeters, meggers, and other diagnostic tools
• Familiarity with MIL-SPEC standards and shipboard cable types

Marine Electrician – 2nd Class

Position Summary:
The 2nd Class Marine Electrician is responsible for supporting the installation and repair of shipboard electrical systems under the guidance of senior electricians. This role requires a good working knowledge of standard practices and tools.

Key Responsibilities:

• Assist with the installation of conduit, cable trays, and shipboard wiring
• Perform basic troubleshooting and component replacement
• Help test equipment and systems for functionality and safety
• Interpret basic schematics and diagrams
• Maintain tools and equipment in good working condition
• Support safety initiatives and maintain a clean work area

Qualifications:

• 2–4 years of marine electrical experience
• Ability to follow schematics and supervisor instructions
• Basic knowledge of testing equipment and shipboard electrical systems
• Familiar with safety procedures in a shipyard environment

Marine Electrician – 3rd Class

Position Summary:
The 3rd Class Marine Electrician is an entry-level position focused on gaining experience in shipboard electrical work. This role includes hands-on assistance with installations, pulling cable, and prepping components under close supervision.

Key Responsibilities:

• Pull cable and assist with cable routing and termination prep
• Set up job materials and tools
• Clean and prep areas for electrical installations
• Shadow senior electricians and learn industry practices
• Follow all safety protocols and contribute to a safe work environment

Qualifications:

• 1–2 years of electrical experience (marine experience preferred)
• Willingness to learn and take direction
• Basic understanding of hand and power tools

About the Opportunity

Join a team that builds with precision, works with integrity, and values craftsmanship at every level. We are a leading marine and industrial construction firm seeking a skilled Marine Shipwright (Carpenter) to support ship repair, marine construction, and structural restoration projects. From bulkheads and dry docks to interior vessel outfitting, your work will help shape and maintain vital maritime infrastructure across a range of challenging and rewarding environments.

What You’ll Do

• Perform skilled carpentry in shipyard environments, including fabrication and installation of wood, composite, and synthetic materials
• Construct and repair marine structures such as keel blocking, cradles, shoring, cribbing, staging, and other structures.
• Maintain, adjust and repair staging and its associated equipment.
• Layout, manufacture and install temporary decking aboard ships.
• Erect and dismantle staging/scaffolding on dry docked or waterborne ships including staging around the sail, stern or within internal tanks and voids.
• Build shelters and plenums and install temporary blocking.
• Maintain a safe and organized workspace in compliance with OSHA and company protocols

What We’re Looking For

Qualifications:

• 3+ years of carpentry experience in a shipyard, waterfront, or marine construction setting
• Familiarity with treated timber, marine-grade plywood, and structural framing
• Strong working knowledge of layout tools such as levels, squares, measuring tapes, and plumb lines
• Experience using pneumatic tools, impact drivers, and chain hoists
• Basic knowledge of pile installation, dock framing, and form setup
• Must be able to lift 50+ lbs, climb ladders, work at heights, and perform tasks in confined or elevated spaces
• Valid driver’s license and reliable transportation required
• Ability to pass pre-employment drug test and background screening

Bonus Skills (Preferred):

• Experienced in and able to erect, maintain, and remove pipe staging and related life rails, platforms and accesses.
• Knowledge of NAVSEA specifications or military shipbuilding standards
• OSHA 10 or 30 Maritime Certification
• Familiarity with fiberglass or composite material installations

Who You Are

You’re someone who thrives in a fast-paced, team-oriented environment. You take pride in doing the job right the first time, whether installing a bulkhead, framing an interior cabin, or fitting a new seawall. You adapt quickly, think critically, and bring an old-school work ethic to every task. You respect the risks of the job and prioritize safety as much as performance.

Working Conditions

• Work is performed outdoors and aboard vessels in varying weather conditions
• May involve confined space entry, overhead work, climbing, and extended periods of standing
• Personal protective equipment (PPE) must be worn at all times on job site

Key Responsibilities:

• Surface Preparation: Prep and level surfaces for tile installation.
• Tile Installation: Measure, fit, and install composite tiles on submarines.
• Caulking & Finishing: Apply caulk and finishing touches to ensure durability and slip resistance.
• Repairs & Maintenance: Remove damaged tiles, replace caulking, and repair tiles.
• Quality Control & Compliance: Ensure all work adheres to shipyard specifications, safety regulations, and maritime industry standards.
• Safety & Worksite Maintenance: Follow strict shipyard safety protocols, wear proper PPE, and maintain a clean, organized workspace.

Preferred Experience & Skills:

• Commercial Carpentry: Experience working on large-scale construction or renovation projects.
• Tile Installation: Proficiency in installing ceramic or composite tile in high-traffic or industrial environments.
• Industrial or Shipyard Experience: Familiarity with working in shipyards, manufacturing plants, or other industrial settings.
• Blueprint Reading: Ability to interpret technical drawings and ship specifications when needed.
• Tool Proficiency: Skilled in using manual tools, power tools, and carpentry equipment.
• Physical Stamina: Capable of lifting materials, kneeling for extended periods, and working in confined shipboard spaces.
• DBIDS Eligibility: Ability to pass background screening for access to military shipyards, including NNSY and HII.
• Safety Certifications: OSHA or shipyard-specific safety training is a plus.

📢 Apply Today! Competitive pay based on experience, with opportunities for advancement in shipboard finishing trades!

About the Role:

Avail Staffing is actively seeking a Marine Electrician Technician II with a strong background in shipboard electrical systems. This position is ideal for a motivated individual with intermediate-level expertise in marine electrical installations, troubleshooting, and repair. Join our team and be part of projects that support the U.S. Navy and commercial marine industries.

Key Responsibilities:

• Install, maintain, and repair shipboard electrical equipment and wiring in accordance with NAVSEA standards
• Interpret and work from electrical schematics, blueprints, and work packages
• Run and terminate cabling, install lighting, switches, motors, controllers, and circuit protection
• Conduct continuity checks, insulation resistance tests, and ensure grounding compliance
• Support the setup and testing of control panels and electrical distribution systems
• Work safely in confined spaces, elevated areas, and active shipyard environments
• Collaborate with other trades to ensure efficient and high-quality work

Qualifications:

• 2–4 years of experience as a Marine Electrician in shipyard or naval vessel environments
• Familiar with MIL-SPEC standards and NAVSEA drawing interpretation
• Strong understanding of AC/DC electrical systems and marine cableway practices
• Experience with cable pulling, terminations, testing, and troubleshooting
• Must pass background check and drug screening
• OSHA 10 Maritime, DBIDS preferred or ability to obtain
• Ability to lift up to 50 lbs, work in confined spaces, and stand for extended periods

Benefits of Working with Avail Staffing:

• Competitive weekly pay
• Reliable long-term project
• Opportunities for overtime
• Growth within skilled trades and government contracts

Ready to Advance Your Marine Electrical Career?
-Send your resume to: jobs@availstaffing.net
-Call us: (757) 292-2323
-Apply online at: www.availstaffing.net

Avail Staffing is proud to be an Equal Opportunity Employer. Veterans and experienced shipyard tradespeople are strongly encouraged to apply.